HD and OD Series Universal Punches - Punch Dies
HD and OD Series Universal Punches - Punch Dies Datasheet
Description:
Dies are available for the machines listed. Please call for availability of other types and sizes.
Numbers shown are the capacity in sheets of 20 pound bond. Capacity will be less for heavier stock and for plastics. For dies not shown, please call for specifications and availability.
Dies for the HD6500 and HD7000 can also be used in the HD7500 and HD7700. However the limitations on length and number of sheets punched remain the same as for the HD6500.
| HOLE PATTERN | HOLE SPACING | HOLE SIZE | MARGIN | OD4000 OD4800 (12") | HD6500 HD7000 (14") | HD7500 (24") | HD7700 (14") |
| 3 Hole | 4-1/4" | 5/16" | 0.313" | 17 | 30 | 30 | 55 |
| 2:1 Round Hole | 1/2" | 1/4" | 1/4" | 17 | 30 | 30 | 40 |
| 2:1 Square Hole | 1/2" | 1/4" x 1/4" | 1/4" | 17 | 30 | 30 | 40 |
| 2:1 Rectangular Hole | 1/2" | 1/4" x 1/8" | 0.188" | 17 | 30 | Call | 40 |
| 2.5:1 Round Hole | 0.400" | 1/4" | 1/4" | 17 | Call | Call | Call |
| 3:1 Round Hole | 1/3" | 11/64" | 0.168" | 17 | 30 | 30 | 40 |
| 3:1 Round w/Thumb Hole | 1/3" | 11/64", Thumb 11/16" | 0.168" | Call | 30 | 30 | Call |
| 3.2:1 Round Hole | 0.3125" | 13/16" | 0.168" | Call | 30 | Call | Call |
| 3:1 Square Hole | 1/3" | 5/32" x 5/32" | 0.219" | 17 | 30 | 30 | 40 |
| 3:1 Square w/Thumb Hole | 1/3" | 5/32" x 5/32", Thumb 3/4" | 0.219" | Call | 30 | 30 | 40 |
| 4:1 Round Hole | 0.248" | 3/16" | 0.188" | 17 | 30 | Call | 40 |
| 4:1 Round Hole | 0.250" | 11/64" | 0.188" | 17 | 30 | 30 | 40 |
| 4:1 Oval Hole | 0.2475" | 15/32" x 3/616" | 0.188" | Call | 30 | Call | 40 |
| 4:1 Oval Hole | 0.250" | 3.5mm x 4.4mm | 0.188" | Call | 30 | Call | 40 |
| 5:1 Round Hole | 0.1969" | 9/64" | 0.160" | 17 | 30 | 30 | 40 |
| 5:1 Round Hole | 0.200" | 9/64" | 0.188" | 17 | 30 | Call | Call |
| 6mm (Coil) Round Hole | 0.2362" | 11/64" | 0.188" | 17 | 30 | 30 | 40 |
| 6mm (Coil) Oval Hole | 0.2362" | 3.5mm x 4.4mm | 0.188" | 17 | 30 | 30 | 40 |
| Plastic Comb | 0.5625" | 5/16" x 1/8" | 0.156" to 0.245" | 18 | 38 | 38 | 48 |
| Plastic Comb | 0.5625" | 5/16" x 1/8" | 0.156" | 18 | - | - | - |
| VeloBind | 1" | 1/8" | 1/8" | 17 | 30 | 30 | 55 |
| Press Plate | Call | Call | Call | Call | Call | Call | Call |
| Custom | Call | Call | Call | Call | Call | Call | Call |
Back to the top of the page.