FP-IVT 3 Spindle Table Top Paper Drill

The FP-IVT is a table top 3 spindle drill with a drilling capacity of up to 2 1/2". The center head is fixed and the outer two heads are adjustable from 2 1/4" to 4 3/4". The table has self centering guides for the placement of paper. Paper size ranges from 3 1/2" to 17" wide. Back margin is adjustable up to a 3 1/2" depth. Table size is 18 1/4" x 14 3/8". Paper drills are available from 1/8" (3mm) to 3/8" (9mm) in diameter.

The FP-IVT is equipped with a moving table that has two stop bars. The first stop bar has adjustable stops so that if drilling jobs with more than 3 holes, this can be set up to accommodate these jobs. The preprogrammed bar has setting for two stops (6 hole) and 12 stops (36 hole).

The FP-IVT has a unique design. the belt driven spindles are powered by three 1/4" horse power motors. As an added safety feature, when the drill head is in the up position, the motor does not run. Power is 110 volts.

• Hand Powered Operation
• Drill Capacity: 2 1/2" recommended but can do 4" (1/4" diameter or larger)
• Drill Diameter: 1/8" (3mm) to 3/8" (9mm)
• Drill Bit Style: Style "FP-60"
• Distance Between Drill Heads: 2 1/4" to 4 3/4" center head fixed
• Power: 3 -110 Volts 1/3 H.P.