|
Extra Bond (EXB) laminating film was specifically designed for modern digital copiers that use fuser oil. It has a has a very aggressive adhesive that works where others fail.
EXB is specially formulated to meet the challenge of emulsion aggregation (EA) toner copiers.. If standard laminating films will not bond to your prints, EXB film could be the solution.
The Details:
50 mm 4:1 Plastic Spiral Coil $159.90 |
Prism 137 Cutting Knife $820.00 |
60950 Evolution 2 Bench for the $666.00 |
36" Stand for the 42" 60606 $576.00 |
25" x 500' 1.5 Mil Matte $84.98 |
1 x COUNTER 1745T11 | $567.10 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x NONSTK-GRIP RING 3/16 | $22.55 |
1 x Sensor Kit #2 (Stopper Sec.)/DBM-120 (#P1280) | $104.60 |
1 x 16" Knife Guard | $32.00 |
1 x HF200 Simplimatic Paper Folder | $899.00 |
1 x 28mm Fabric Cutting Tool | $58.50 |
1 x NONSTK-EXT.SPRING,BRAKE TEN | $60.91 |
1 x ASSEMBLY, REMVBLE IDLER W/STAN | $1,767.32 |
1 x Pulley | $12.69 |
1 x DC-210N Perf & Score Cutter | $179.00 |
1 x 8" Screw Lock Rings | $50.16 |
1 x 1/4" Extra Long Reach Hole Punch | $149.95 |
1 x BULB 34V.25W.(BAYONET SOCKET) | $46.63 |
1 x HS 2000 MGC 12up Business Card Slitter DISCONTINUED | $1,595.00 |
1 x CRADLE BUSHING | $283.70 |
1 x RUBBER KEY S/W U-65 637400077 | $49.51 |
1 x BLADE,SLITTER | $20.31 |
1 x Photo Sensor Set/DF-915,920 | $67.27 |
1 x NONSTK-KEY 1/8 SQUAREX 5/8 LONG | $22.55 |
1 x Round Belt DC-8 Micro | $63.64 |
1 x DOUBLE CHAIN LOCK | $21.77 |
1 x 1/4" Push-to-Lock Loop Screws | $19.25 |
1 x SHAFT, UPPER PILE TABLE LIFT | $2,417.46 |
1 x RM-15/2 15" Cutting Mat (2 Pack) | $11.29 |
1 x HS-2000 B Business Card Slitter DISCONTINUED | $1,495.00 |
1 x 60950 Evolution 2 Bench for the 64" Evolution E2 | $666.00 |
1 x SHAFT 11A-53290 | $211.87 |
1 x BOTTOM FUSE ASSY DISCONTINUED | $27.14 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x DRIVE PRESS. ROLLER | $4.48 |
1 x BRSHLSS DC GEARMOT >USE 1722899 | $7,641.97 |
1 x ASSEMBLY, REWIND, ORCA II | $1,233.71 |
1 x DRILL BIT 1/8 2IN LONG PD18-2 | $96.88 |
1 x Simplex 84" Cutter Bar (SIM210) | $726.30 |