|
The ONYX 4000PLUS is an 11 inch (A4) open-ended punch that features the EZ operator changeable dies. It has a paper punching capacity of 20 sheets of 20 pound (80 gsm) bond and a very reasonable price, this punch makes manual punches obsolete. With a three year limited warranty, and a very competitive price, no other solution in its class can match its price performance
The ONYX 4000PLUS comes with 1 punch die of your choice. Other dies are sold separately.
Punch Dies Available for the ONYX 4000PLUS:
Coil Punch Pattern Dies:
4:1 Coil Standard Round Hole, 4:1 Coil Large Rounde Hole, Coil 5mm Round Hole, Coil 6mm Round Hole
Wire Punch Pattern Dies:
2:1 Wire Rectangle Hole, 2:1 Wire Square Hole, 3:1 Wire Square Hole
Comb Punch Pattern Die
Velobind Punch Pattern Die
3 Hole, 2:1 Round Hole, 3:1 Round Hole
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 11 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Years |
Power: | 115 Volts AC, 2.5 Amps, 60 Hz |
Size: | 6" H x 16" W x 15" D |
Shipping Weight: | 31 Pounds |
Photo 10 Mil Laminating Pouches $32.38 |
Count Pneumatic Strike Perf Kit $3,742.19 |
18" x 200' 5 Mil Low Melt $70.48 |
50 mm 4:1 Plastic Spiral Coil $159.90 |
Prism 137 Cutting Knife $820.00 |
1 x COUNTER 1745T11 | $567.10 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x NONSTK-GRIP RING 3/16 | $22.55 |
1 x Sensor Kit #2 (Stopper Sec.)/DBM-120 (#P1280) | $104.60 |
1 x 16" Knife Guard | $32.00 |
1 x HF200 Simplimatic Paper Folder | $899.00 |
1 x 28mm Fabric Cutting Tool | $58.50 |
1 x NONSTK-EXT.SPRING,BRAKE TEN | $60.91 |
1 x ASSEMBLY, REMVBLE IDLER W/STAN | $1,767.32 |
1 x Pulley | $12.69 |
1 x DC-210N Perf & Score Cutter | $179.00 |
1 x 8" Screw Lock Rings | $50.16 |
1 x 1/4" Extra Long Reach Hole Punch | $149.95 |
1 x BULB 34V.25W.(BAYONET SOCKET) | $46.63 |
1 x HS 2000 MGC 12up Business Card Slitter DISCONTINUED | $1,595.00 |
1 x CRADLE BUSHING | $283.70 |
1 x RUBBER KEY S/W U-65 637400077 | $49.51 |
1 x BLADE,SLITTER | $20.31 |
1 x Photo Sensor Set/DF-915,920 | $67.27 |
1 x NONSTK-KEY 1/8 SQUAREX 5/8 LONG | $22.55 |
1 x Round Belt DC-8 Micro | $63.64 |
1 x DOUBLE CHAIN LOCK | $21.77 |
1 x 1/4" Push-to-Lock Loop Screws | $19.25 |
1 x SHAFT, UPPER PILE TABLE LIFT | $2,417.46 |
1 x RM-15/2 15" Cutting Mat (2 Pack) | $11.29 |
1 x HS-2000 B Business Card Slitter DISCONTINUED | $1,495.00 |
1 x 60950 Evolution 2 Bench for the 64" Evolution E2 | $666.00 |
1 x SHAFT 11A-53290 | $211.87 |
1 x BOTTOM FUSE ASSY DISCONTINUED | $27.14 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x DRIVE PRESS. ROLLER | $4.48 |
1 x BRSHLSS DC GEARMOT >USE 1722899 | $7,641.97 |
1 x ASSEMBLY, REWIND, ORCA II | $1,233.71 |
1 x DRILL BIT 1/8 2IN LONG PD18-2 | $96.88 |
1 x Simplex 84" Cutter Bar (SIM210) | $726.30 |