|
This 16" knife guard is made of ¼“ thick heavy-duty polymer, and measures 2½“ tall by 16" long. Use it for protection during all non-production work.
A magnetic strip holds the guard securely in place, keeping the knife tip suspended. A black and yellow safety stripe is added for increased visibility.
This knife guard is designed to protect knives up to 15" long.
Note: This knife guard is not intended for shipping protection. Use a knife board when you need to transport your knife.
Onyx HD7000 Comb, Wire, & Spiral $4,315.70 |
7/8" Colored Aluminum Screw Posts $16.85 |
Harris 652 Bottom Front Cutting $438.00 |
38"x250' 3 mil Digikote Gloss $135.60 |
Seybold 47" Saber Cutting Knife $661.00 |
1 x CLUTCH SPRING | $8.16 |
1 x Finish @ Coil E1 Coil Inserter with built in Electric Crimper | $699.00 |
1 x Stand, Waste Catcher & Roll Feeder for 60" ARC 60609 | $792.00 |
1 x POWER SWITCH 637400042 | $49.93 |
1 x Wohlenberg 44 FS50 Front Cutting Knife | $210.00 |
1 x SAW REAR TOWER RAIL | $40.93 |
1 x Lassco Spinnit FMMH 3 Fully Automatic Hydraulic Three Spindle Paper Drill | $9,950.00 |
1 x 3/8" Push-to-Lock Loop Screws | $19.60 |
1 x 3mm Euro Standard Hollow Drill Bit | $24.98 |
1 x 16" Knife Guard | $32.00 |
1 x Omni 532 Bottom Front Cutting Knife | $438.00 |
1 x Horizon BQ-160 Perfect Binder | $20,085.00 |
1 x CB 5.8 W/O MTR 602 | $951.19 |
1 x 23.5" Knife Guard | $47.00 |
1 x NONSTK-GUARD, HINGE, CALENDER ROLL | $292.56 |
1 x Big Bench Xtra for 104" Javelin Xtra & Series 2 | $1,093.50 |
1 x Replacement Cutting Wheels for 63" Excalibur Series Gold Head | $85.50 |
1 x TRIM ROTATE KNIFE >USE 639900151 | $418.65 |
1 x RENZ TC-20 Thumb Cut Paper Calendar Punch | $189.00 |
1 x PCB ASSFTY A/CUTTER INTERRUPTE | $28.76 |
1 x GAGE, SMC G46-10-02-M-C | $64.49 |
1 x Plastic Luggage Strap | $19.95 |
1 x Spectra-Coat 36" UV Coater | $0.00 |
1 x Clamp Pads | $57.95 |
1 x Dahle 10560 High Speed Paper Folder | $399.00 |
1 x Textile Blade Holder | $85.50 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x PULLEY TIMING | $47.88 |
1 x VersaBind-M Manual Punch and Binding Machine | $1,169.00 |