|
The Versalam-2700 EP does everything the 2700 P does and does it faster. It does single or double sided laminating, with all film up to 10 mil, and mounting too. It is designed for production laminating of all materials up to 27" wide.
The heated rollers give great results even when laminating difficult materials. The adjustments for temperature, speed, and pressure allow you to use most laminating films at their optimum settings.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 27" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 8.8 feet/minute |
Slitters: | Yes |
Core Size(s): | 1", 3" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 1/4" |
Speed Control: | Variable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 V, 60 Hz, 1600 W |
Size: | 23-1/2" x 51" x 26-1/2" |
Shipping Weight: | 158 Pounds |
HR13 13" Photo Laminator $0.00 |
Multi 200 Cutting Knife $162.00 |
7 mm 4:1 Plastic Spiral Coil $7.61 |
Martin Yale W15 15" Paper Cutting $189.00 |
XR Long Blades $27.00 |
1 x Binding Workstation | $219.00 |
1 x 7/8" I.D. Clear Plastic Snap Rings | $12.49 |
1 x 1/8" Solid Brass Screw Posts (10 Sets) | $27.16 |
1 x D846 Heavy Duty Manual Paper Cutter | $1,779.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $4,315.70 |
1 x Sensor, Mark Reader, White/BCC-228 | $179.55 |
1 x SteelTraK 65" Utility Cutter | $5,060.00 |
1 x 125T DBL SIDED BELT | $65.32 |
1 x BRUSH | $76.02 |
1 x PAPER SEPARATOR F/306A | $16.51 |
1 x FEED BELT, 62001 | $41.85 |
1 x Roll Laminating Workstation | $279.00 |
1 x PIN SERVICE KIT C4 | $91.91 |
1 x HOUSING TOP-OL | $170.83 |
1 x 3/4" Standard Steel Screw Posts (100 Sets) | $32.01 |
1 x Belt, Slitting Transport/BCC-228 | $33.93 |
1 x Onyx 3 in 1 PPS | $10,370.00 |
1 x 11/16" I.D. White Plastic Snap Rings | $9.25 |
1 x Digital 42 Roll Laminator | $16,499.00 |
1 x Type A Hollow Drill Sharpener | $129.00 |
1 x Minipad Padding Press | $289.00 |
1 x Thermal Glue Pellets for Perfect Binders | $279.00 |
1 x GAGE, SMC G46-10-02-M-C | $64.49 |
1 x BI-METAL THERMOSTAT 637800003 | $37.96 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $880.65 |
1 x Harris 532 Top Front Cutting Knife | $186.00 |
1 x HEATER, 2800W/240V, ORCA | $580.23 |
1 x Royo S72TA Cutting Knife | $480.00 |
1 x Kolbus HD 151 (10 Hole) Cutting Knife | $330.00 |
1 x TRANSF 9V 120V 6PIN NRML NA US | $47.30 |
1 x HOOK-COIL HOLE FTCFT | $74.41 |
1 x 8MM SPINE FRMR-CC908000 | $117.76 |
1 x Spring T/DB-10TR | $10.13 |
1 x TRMINAL BLOCK, 2-CONDUCTOR | $17.55 |
1 x 1/2" Type HO-1/2 staples | $8.33 |
1 x TENSION BOLT 632501328 | $55.62 |
1 x CLUTCH SPRING | $8.16 |
1 x HS-2000 B Business Card Slitter DISCONTINUED | $1,495.00 |
1 x RUBBER WHEEL 96V-22100 | $111.50 |
1 x FWD/REV SWITCH 14.95 | $529.15 |
1 x INDEX DISC LEFT | $53.54 |
1 x REAR SPROCKET 20T | $47.13 |
1 x NONSTK-SCREW,#3 X 8 | $20.44 |
1 x Zippy Cutter | $9.95 |
1 x 3/8" Push-to-Lock Loop Screws | $19.60 |
1 x ASSY, CANTILEVER MOUNTING PLAT | $630.46 |
1 x Notching Blade/DB-250 | $231.58 |