|
The Sabre Series 2 GPC 60738 General purpose cutter for media size up to 100” with a 5 year general warranty on all parts (except blades) and a 20 year warranty on the bearings.
Designed to cut a wide range of sheet materials, the Sabre Series 2 GPC 100" Cutter offers a standard of straight, square and clean cutting. It is designed for use on a bench or attached to the optional stand. Sabre Series 2 includes blade depth adjustment and features a cutter head which automatically retracts to a safe position when not in use.
The innovative hinge and lift arm mechanism makes it possible to cut materials, which are longer than the length of the cutter. It also accepts materials of varying thickness without affecting either the line or angle of cut. Superbly styled, the extruded anodized aluminum base incorporates a narrow groove to accept the blade tip when cutting.
The new Sabre Series 2 GPC cutting head features a reversible Graphix Blade making it ideal for left-handed and right-handed operators. The blade locking thumb screw adds safety and convenience.
A full length silicone rubber grip strip mounted in the surface of the base and two more on the underside of the cutter bar ensures all work is held perfectly in place while cutting and provides protection for even the most sensitive surfaces.
Cut Length: | 100" inches |
Capacity: | 1/2" |
Size: | 104" W x 14 1/4" D x 2 1/4" H |
Velcro® Dots $94.95 |
Maxima MS-115 Cutting Knife $900.00 |
Drivers License 7 Mil Laminating $7.26 |
36" Stand for the 60" 60609 $652.50 |
EBA 10/520 Cutting Knife $374.00 |
1 x Minipad Padding Press | $289.00 |
1 x Lever Shaft Unit | $46.53 |
1 x P TOPIC FILM SHAFT BRAKE PRES | $28.64 |
1 x Pilot Light | $17.96 |
1 x 90007255006 HAND KNOB | $20.44 |
1 x STAPLER HEAD/ANVIL | $42.99 |
1 x Bearing DC-535 /608ZZ | $41.49 |
1 x Lower Blade Unit/DC-645 | $326.03 |
1 x Sponge Roller/DP-63S/P | $86.39 |
1 x WORM GEAR | $78.62 |
1 x 1/8" Hollow Drill Bit for FP60 | $39.95 |
1 x OSP WIRED FOLD TBL MOTOR | $134.66 |
1 x STD Belt/DSC-10/20 | $59.40 |
1 x Spring L/CC-228 | $40.26 |
1 x BUSHING F/BINDING MECHANISM | $23.17 |
1 x D-80 F/ROLLER 631800110 | $1,144.08 |
1 x James Burns Lhermite EB3500 14" Electric Wire Closer | $3,699.00 |
1 x HEATER, INCOLOY, F60+-1 | $435.63 |
1 x Black Loop Head Adhesive Buttons | $25.95 |
1 x iNumber Electric Hand Feed Numbering Machine | $3,950.00 |
1 x THERMAL CUT-OFF 9X186 | $104.36 |
1 x PULLEY HTD TIMING, 3MM PITCH | $22.55 |
1 x DRILL BIT 1/8 2IN LONG PD18-2 | $96.88 |
1 x Shelf Push Pins | $49.50 |