|
A set of three replacement sight-line strips for the 63" Excaliber series utility cutters.
VersaBind-E Electric Punch and $1,799.00 |
3/16" Iram / Sterling Standard $33.95 |
25" x 37" 5 Mil Matte Laminating $295.95 |
8-3/4" x 11-1/4" Heat Resistant $39.95 |
1/8" Challenge Lassco Drill Bit $39.95 |
1 x PCB 761021 | $3,520.47 |
1 x FUSEHOLDER 4500 637000003 | $30.68 |
1 x 3/16" Solid Brass Screw Posts (100 Sets) | $69.84 |
1 x BRACKET, PIVOT | $860.06 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x 3/4" Loose Leaf Rings | $17.85 |
1 x Corner Stapling Guide | $77.15 |
1 x TRIM ROTATE KNIFE >USE 639900151 | $418.65 |
1 x ASY CLUTCH GEAR | $39.39 |
1 x 1/4" Hollow Drill Bit for FP-60 | $39.95 |
1 x Big Bench Xtra for 84" Javelin Xtra & Series 2 | $1,026.00 |
1 x Foldup 5" Wall Mount Literature Holder | $92.00 |
1 x 85 series dust collector | $28.95 |
1 x Ceiling Grid Figure-8 Clips | $17.95 |
1 x 14" I-Bar Shrink Wrap Sealer | $355.00 |
1 x 90007255006 HAND KNOB | $20.44 |
1 x Nylon Secure Tack | $13.50 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
1 x Clutch Spring | $11.14 |
1 x IDLER SHAFT MOUNT | $624.20 |
1 x Omni 542 Top Side Cutting Knife | $134.00 |
1 x CR828 Semi-Automatic Creaser | $1,195.00 |
1 x XR Long Blades | $27.00 |
1 x 60950 Evolution 2 Bench for the 64" Evolution E2 | $666.00 |
1 x Kutrimmer 1058 22 1/2" Paper Cutting Machine | $1,050.00 |
1 x HOSE CLAMP DISCONTINUED | $5.71 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x Driving Roller/DC-645 DISCONTINUED | $248.47 |
1 x Hand Held Hollow Drill Bit Sharpener | $65.95 |
1 x WIRE ASSFTY EXCELAM II-355 | $23.44 |
1 x MBM/Ideal AP45 Air Purifier | $379.00 |
1 x Uno IR counterfeit detector | $229.95 |
1 x P Roll Unit/DP-430/460 | $199.15 |
1 x OUTER TENSION DISC 630800108 | $94.11 |
1 x ALLUM EXTR ESSEX | $79.44 |