VeloBind Machines

VeloBind Machines

Advanced Document Systems & Supply, Inc. has been an authorized VeloBind® dealer and expert GBC VeloBind machine repair facility since 1994. We are a nationwide leader in refurbishing old velo binding machines as well as selling a full line of new velobind equipment. We carry the most popular and workhorse GBC binding machine, the GBC Velobind System 3 pro that binds up to 3 inch thick documents. These gbc machines replaced and are most similar to the following older models of VeloBind equipment: VeloBind model 750, Velo-bind 750B, Velo-Bind 323, Ibico VeloBind 530VB.

The GBC System 2 Velobind is the velobinder that is capable of binding up to 2 inch documents. It replaced the popular VeloBind model 223.

The Tamerica V2000 pro is a new model that is modeled after the popular Velobind 223 and has a time tested design with the bind capacity of up to 2 inches.

Lastly, the GBC V800Pro, also known as the System One VeloBind, can bind up to 1 inch of paper. It is the model that has replaced the popular VeloBind 123. We carry many other velo binding machines that perform the punching operation as well; however, these 4 machines are the only ones that do both. Ask us about our refurbished Velobind machines today.

VeloBind is a type of binding that binds paper together using a thin plastic strip to hold the paper along the binding edge. VeloBind is also referred to as strip binding or velo bind. The pages are punched with small round holes. Then the sheets of paper are inserted over small round spikes coming off the flat part of a thin plastic strip. Next you insert a plastic end strip with holes in it over the small round plastic spikes. Next, the document is inserted into the machine with the spikes down. The velobinding machine or velobinder, as it is often referred to, clamps the paper tight and cuts off the excess plastic spikes searing the book closed. The resulting velo bound document is very secure and provides a sharp, clean professional look.

Velobind or velo binding is popular with the legal trade and financial institutions because of its clean secure bind. Another advantage of Velobind is the only mechanical binding available that binds documents up to 3 inches. It is also one of a very few types of binding that can bind up to 14 inch wide documents.

Most Popular

GBC Electric Velobind V110e
GBC Electric Velobind V110e
$249.00
 Add to Cart
OD4012 Interchangable Die Paper Punch
OD4012 Interchangable Die Paper Punch
$2,690.00
 Add to Cart
VeloBind System 1 / GBC V800Pro
VeloBind System 1 / GBC V800Pro
$1,849.00
 Add to Cart
Velobind System 2
Velobind System 2
$2,249.00
 Add to Cart
Compare All
GBC Electric Velobind V110e
GBC Electric Velobind V110e [Electric Velobinder]

The V110e is an electric VeloBind punch that punches up to 20 sheets and binds up to 200 sheets. It is designed to work with GBC's 4 prong Electric VeloBind Strips.

[More]
$249.00
 Add to Cart

VeloBind System 1 / GBC V800Pro
VeloBind System 1 / GBC V800Pro [SYSTEM 1]

The VeloBind System 1 / GBC V800Pro is an economical velobind machine that is capable of binding up to one inch documents. It is comprised of a manual punch and an electric "hot knife" binder. The System 1 also known as the GBC V800Pro is the model that replaced the older Velo-bind 123 model. The System One velo binder is a time tested durable punch and bind for medium duty usage. For heavier duty usage see our System 3 Pro

[More]
$1,849.00
 Add to Cart

Tamerica V2000 Pro Velobind Machine
Tamerica V2000 Pro Velobind Machine [V2000 Pro]

The V2000 Pro VeloBind Machine is a "hot knife" Velo Binding machine. It is a high quality alternative to the more expensive GBC velobind machine. The V2000 PRO VeloBind Machine is an easy to use, reliable and affordable Hot Knife Velobind Machine. The V2000 PRO creates a secure professional bind using 11 pin hot knife VeloBind strips. Up to 2 inch thick documents can be bound by the V2000 velo binder. It can punch up to 20 sheets of 20 lb. paper and has a 14" punch and binder width for binding legal size paper.

[More]
$1,295.00
 Add to Cart

GBC Velobind 750 Electric Velobinder
GBC Velobind 750 Electric Velobinder [velobind750]

The GBC Velobind 750 uses "hot knife" VeloBind strips for tamper proof security and a neat, professional appearance. The GBC Velobind 750 binds up to 3 inch thick documents.
 

[More]
$4,295.00
 Add to Cart

Velobind System 2
Velobind System 2 [System 2 VeloBind]

The Velobind System 2 is an affordable, versatile electric punch and bind machine. Uses true "hot knife" VeloBind® strips for tamper proof security and a neat, professional appearance. This machine replaced and is similar to the following older models of VeloBind equipment: VeloBind 223 model and the Velobind 520VB.

This VeloBind machine features an electric, power operated punch and bind system. It uses the patented "hot knife" system to sear the plastic pins, producing a permanent seal.

[More]
$2,249.00
 Add to Cart

Velobind System 3 Pro
Velobind System 3 Pro [System 3 Pro]

The Commercial duty, industry standard velobind machine. The System 3 Pro uses "hot knife" VeloBind® strips for tamper proof security and a neat, professional appearance. The GBC System 3 pro binds up to 3 inch thick documents and is a workhorse.

[More]
$4,295.00
 Add to Cart

Velobind System 4 Bind
Velobind System 4 Bind [System 4]

Industrial duty electric binding machine. It uses true "hot knife" VeloBind® strips for tamper proof security and a neat, professional appearance. Allows you to separate punch and bind operations for greater productivity.

[More]
$3,249.00
 Add to Cart

Onyx 4000Plus Heavy Duty Interchangeable Die Punch
Onyx 4000Plus Heavy Duty Interchangeable Die Punch [onyx4000plus]

The ONYX 4000PLUS is an 11 inch (A4) open-ended punch that features the EZ operator changeable dies. The ONYX 4000PLUS has a paper punching capacity of 20 sheets of 20 pound (80 gsm) bond.

[More]
$1,795.00
 Add to Cart

OD4012 Interchangable Die Paper Punch
OD4012 Interchangable Die Paper Punch [OD4012]

Economical multi-purpose 11 inch heavy duty electric punch able to punch up to 25 sheets. Electrically punches any standard hole pattern. (Comes with one standard die of your choice. Other dies are sold separately ) Combs, Wire Loop (3:1 or 2:1, RH or SH), Plastic coil 4:1 and 5:1, VeloBind, and 3 hole loose leaf. (12 Total)

[More]
$2,690.00
 Add to Cart

ONYX OD4012 Heavy Duty Electric Interchangeable Die Punch
ONYX OD4012 Heavy Duty Electric Interchangeable Die Punch [onyxod4012]

The Onyx OD4012 is a Heavy Duty 11 inch open-ended comb, wire, coil, and spiral punch machine. The Onyx OD4012 features the E-Z Change Punch Die System for changing punch patterns quickly.

[More]
$2,690.00
 Add to Cart

HD6500 Interchangable Die Punch
HD6500 Interchangable Die Punch [HD6500]

Heavy duty, 14 inch vertical load punch with interchangeable die system. Punches up to 35 sheets in 20 different hole patterns.

[More]
$2,895.00
 Add to Cart

HD6700 Interchangable Die Punch Machine
HD6700 Interchangable Die Punch Machine [HD6700]

The Rhino Tuff HD6700 Interchangable Die Punch Machine has a heavy duty motor to power through any binding hole pattern you choose. 20 Interchangeable dies available and one included. 14" open throat for all your coil binding, wire binding, plastic comb binding, and many more.

[More]
$3,749.00
 Add to Cart

HD7000 Interchangable Die Punch
HD7000 Interchangable Die Punch [HD7000]

Heavy duty, 14 inch vertical load punch with quick-change interchangeable die system. Punches up to 35 sheets in 20 different hole patterns.

[More]
$3,495.00
 Add to Cart

ONYX HD7000
ONYX HD7000 [ONYXHD7000]

The HD7000 is a 14-inch (356 mm) open-ended spiral, comb, wire and coil punching machine that features the patented “quick change” die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace.

[More]
$3,495.00
 Add to Cart

HD7500 24 inch Interchangable Die Punch
HD7500 24 inch Interchangable Die Punch [HD7500]

Heavy duty, 24 inch vertical load punch with quick-change interchangeable die system. Punches up to 35 sheets in 20 different hole patterns.

[More]
$4,699.00
 Add to Cart

HD7700 Extra Heavy Duty Interchangable Electric Die Punch
HD7700 Extra Heavy Duty Interchangable Electric Die Punch [HD7700]

The HD7700 Extra Heavy Duty Interchangable Electric Die Punch has been Discontinued and replaced by the ONYX HD7700 Ultima Punch For Wire, Comb & Spiral Binding

See our Multi-Purpose index for a complete list of our current Multi-Purpose models.

The heaviest duty punching with a quick change die system. Punches up to 55 sheets in 20 different hole patterns.

[More]
$0.00
 Add to Cart

ONYX HD7700 Ultima Punch For Wire, Comb & Spiral Binding
ONYX HD7700 Ultima Punch For Wire, Comb & Spiral Binding [HD7700]

The HD7700 Ultima is the top of the line heavy duty durable Table Top Punch that has no equal. Combining the Rhin-O-Tuff patented Quick Change Die System.

[More]
$4,595.00
 Add to Cart

PAL-14 Picks-A-Lift
PAL-14 Picks-A-Lift [PAL-14]

Maximize your production through the consistent picking of paper for punching. In Conjunction with the Apes-14, Punching productivity out performs most fully automatic punching equipment. In addition the picks-a-lift offers the flexibility of picking various paper thicknesses, tabs, and other hard to run documents on most automatic punches.

[More]
$2,395.00
 Add to Cart

Pal M Picks-a-Lift Manual Paper Picker
Pal M Picks-a-Lift Manual Paper Picker [PAL M]

The Pal M Picks a Lift add productivity to your punch jobs. You can easily adjust the amount it picks to maximum amount of paper your machine can punch. Your whole binding process will get much more efficient when you dont have to inaccurately measure the paper to punch each time.

[More]
$855.00
 Add to Cart
Compare All
We Accept
SSL Certificate