|
The pal is obsolete. It has been replaced by the ONYX PAL-M Piks-A-Lift Manual Module.
The Pal M Picks a Lift add productivity to your punch jobs. You can easily adjust the amount it picks to maximum amount of paper your machine can punch. Your whole binding process will get much more efficient when you dont have to inaccurately measure the paper to punch each time.
The Pal M Picks a Lift fits on top of Rhino-Tuff Vertical punches or can be used with any punching machine.
3/16" Martin Yale / Lihit / $33.95 |
7/32" Martin Yale / Lihit / $33.95 |
8" Shrink Wrap Film $56.40 |
Sabre Series 2 GPC 120" Cutter $2,025.00 |
VBF 135A Top Left Cutting Knife $354.00 |
1 x Badge Reels | $2.95 |
1 x Plastic Luggage Strap | $19.95 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Roll Laminator Cleaning Kit | $62.95 |
1 x Camco 250 Top Side (12") Cutter Knife | $156.00 |
1 x Table Top Slot Punch with Guide | $27.95 |
1 x Camco Big 3 Top Side (12") Cutter Knife | $156.00 |
1 x Removable Strap Clip | $15.95 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x Motor 120v (New) | $449.51 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x Camco Big 3 (16") Cutter Knife | $186.00 |
1 x Pressure Sensitive Pin | $24.95 |
1 x Onyx 3 in 1 PPS | $10,370.00 |
1 x Onyx HD7500 Horizontal Wire, Comb & Spiral Coil Punch Machine | $6,179.00 |
1 x Zippy Cutter | $9.95 |
1 x RENZ TC-20 Thumb Cut Paper Calendar Punch | $189.00 |
1 x GBC Locking Laminator Cabinet | $859.00 |
1 x Multi–Finisher 3-in-1 Binding Machine for Comb, Coil & Wire | $549.00 |
1 x Utility Workstation | $0.00 |
1 x ID Photo Die Cutter | $289.00 |
1 x Onyx PAL-14 Picks-A-Lift Automated Module | $2,799.00 |
1 x Belt | $53.10 |
1 x Count Molded Silicone Gripper Wheel for Upper Assembly | $50.33 |
1 x 8" Hand Sealer with Cutter | $99.95 |
1 x TURN SILICON 620-OS | $21.45 |
1 x Simplex 44" Cutter Bar (SIM110) | $604.80 |
1 x Sabre Series 2 GPC 100" Cutter (60738) | $1,810.00 |
1 x MBM iBooklet Tabletop Booklet Maker | $1,883.00 |
1 x BLADE INSERT/SIDE SLITTER 5031 | $29.48 |