|
The accuracy of the Javelin Series 2 makes it ideal for cutting banner materials, pop-ups and other display materials that require precise and accurate cutting to within .008" over the full length of the cut. With this precise cutter, you can eliminate gaps and wasted material.
The Javelin Series 2 features a new, high performance cutting head design that relies on strong Graphik blades with a cutting depth up to 13mm. These unique reversible blades cater to both left and right-handed operators and cut materials up to ½". This new head can also accommodate an easy-to-change 45mm textile blade holder, as well as a vertical medium duty blade holder with a cutting depth up to 3⁄8" (10mm).
Lift & Hold Mechanism:Designed to fit the Javelin Series 2 and Max precision cutting bars, the Lift & Hold Mechanism is affixed to the table by screws, ultimately securing the cutter bar in place to prevent shifting while cutting. The device allows operators to easily lift the cutter bar, slide the material in place and clamp down to make precision cuts.
Big Bench Xtra:Another option is to combine the Javelin Series 2 with the Keencut Big Bench Xtra to create a complete cutting table and workstation for your shop.
Cut Length: | 64" |
Capacity: | 1/2" |
Size: | 70 3/4" W x 6" D x 2 1/2" H |
![]() 3" Screw Lock Rings $28.95 |
![]() 7/32" Martin Yale / Lihit / $33.95 |
![]() 9/32" Martin Yale / Lihit / $33.95 |
![]() Loose Leaf Ring Variety Pack $29.95 |
![]() Camco 250 (17") Cutter Knife $154.00 |
1 x BUSHING F/BINDING MECHANISM | $23.17 |
1 x VersaBind-E Electric Punch and Binding Machine | $1,799.00 |
1 x UPPER HEATER SUPPORT, U-65 | $24.36 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x TBD - THERMOSTAT HEAT 425LM/426LM | $117.33 |
1 x XHC-150 Extra Heavy-Duty 3 Hole punch | $179.95 |
1 x IDLE GEAR SUPRT, U65 630300396 | $24.36 |
1 x GC10 LEADING EDGE SENSOR SET | $190.44 |
1 x 1" Loose Leaf Rings | $21.70 |
1 x PCB 2273810 C800 | $436.98 |
1 x Type A Hollow Drill Sharpener | $129.00 |
1 x INFRARED HTR SUPPORT, U-65 | $23.68 |
1 x MARKVII CONVEYOR MOTOR RETRO | $390.81 |