|
The FP-IVT is a table top 3 spindle drill with a drilling capacity of up to 2 1/2". The center head is fixed and the outer two heads are adjustable from 2 1/4" to 4 3/4". The table has self centering guides for the placement of paper. Paper size ranges from 3 1/2" to 17" wide. Back margin is adjustable up to a 3 1/2" depth. Table size is 18 1/4" x 14 3/8". Paper drills are available from 1/8" (3mm) to 3/8" (9mm) in diameter.
The FP-IVT is equipped with a moving table that has two stop bars. The first stop bar has adjustable stops so that if drilling jobs with more than 3 holes, this can be set up to accommodate these jobs. The preprogrammed bar has setting for two stops (6 hole) and 12 stops (36 hole).
The FP-IVT has a unique design. the belt driven spindles are powered by three 1/4" horse power motors. As an added safety feature, when the drill head is in the up position, the motor does not run. Power is 110 volts.
Warranty: | 1 Year limited |
Power: | 110 Volts, 60Hz |
Size: | 22-3/8"(H)x 24"(W)x 21.2"(L) |
Shipping Weight: | 145 Pounds |
5" Colored Aluminum Screw Posts $73.65 |
Muller Martini 1522 Minuteman $179.00 |
4705 18-3/4 Inch Manual Paper $3,639.00 |
1/4" Colored Aluminum Screw Posts $12.85 |
40"x250' 5 mil Digikote Gloss $310.86 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x SWITCH ACTUATOR, IS127020 | $229.18 |
1 x BCS412 Business Card Slitter | $1,979.00 |
1 x Ceiling Grid Twist Hanger with String | $40.95 |
1 x Triumph 4305 Manual Paper Cutter | $2,496.00 |
1 x SPRING NUT | $7.80 |
1 x Sabre Series 2 GPC 40" Cutter (60735) | $1,220.00 |