PL-1200HP 12 in. High Performance Laminator

The 12" PL-1200HP is a cost effective yet high performance laminating machine. It not only produces a superb finish and edge seal, but it is also capable of speeds up to 17 feet per minute on 1.5 Mil material and up to 10 feet per minute on 3 Mil. It accepts films from 1 to 10 Mil thick and will laminate materials such as foam board up to 1/4" thick. The PL-1200HP sets up in minutes and has a thru-put capability in excess of 1000 feet per hour.

The PL-1200HP features a patented heated roller design for fast, high quality lamination. This laminator handles a wide variety of laminating projects, using polyester, polypropylene, nylon, vinyl, and other film, both hot and cold.

• Uses laminating film from 4" to 12" wide
• Maximum speed of 18 feet per minute (Proper laminating speed for your film may be lower.)
• Typical lamination speed: 1.5 Mil at 230° - 15 feet/minute, 3 Mil at 250° - 8 feet/minute.
• Laminates: Polyester, Polypropylene, Nylon, Vinyl, and other plastics (thermal or cold).
• Maximum film thickness is 10 Mil.
• Maximum substrate (mounting) thickness is 0.250 inch.
• Coantains two cooling fans at 110 cfm ea.
• Warm-up time is about 4 minutes.
• Maxaximum film roll diameter is 11" with stand, 6" without stand.
• Includes standard steel stand and 3" film mandrels.
• Gapable Rollers: Yes
• Front heat and rear pull rollers.
• Solid state temperature control has a digital readout with 2 degree hysteresis.
• DC high torque gear motor with solid state variable speed controller, both air cooled.
• 2 micro-adjustable slitters included.
• Heated rollers: 850 W ea (1700 combined), 5803 BTU's.
• Shipping Dimensions: Laminator 18" x 28" x 20", Stand 23" x 33" x 8"
• Shipping Weight: Laminator 67 lbs; Stand 62 lbs (Ships by truck only)