|
The Phoenix 27” Production Model is a smart choice for production environments looking for an economical, easy to use unit. The tabletop design is great for smaller working areas.
Designed to offer maximum flexibility, the unit allows the use of either 1” or 2-1/4” core laminating films in thicknesses of 1.5 mil to 10.0 mil. The unit can also be gapped incrementally at settings of 1/16”, 1/8”, 3/16” and 1/4” to accomplish mounting on a large variety of substrates.
With safety and energy savings concerns in mind, the Phoenix 2700 includes the latest innovations. Safety measures include safety latches on the feed tray and a safety shield preventing the unit from running if they are not in place. To conserve energy, the machine will drop into a sleep mode (175 ̊) if unit has been idle for 1/2 hour. If there is no activity on the unit for 3 hours, the heaters turn off.
Max. Laminate Thickness: | 10 Mills |
Max. Laminate Width: | 27 inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 10 feet/minute |
Core Size(s): | 1" and 2-1/2" |
Temp. Control: | Yes |
Laminate/Mount Thickness: | 0.25" |
Speed Control: | Yes |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 VAC, 60 Hz, 1600 W, 13.3 A |
Size: | 36.5”W x 16”H x 18”D |
Shipping Weight: | 135 Pounds |
Grapha 1522 Minuteman Bottom Front $222.00 |
Adhesive for BQ-P60 and BQ-P6 $169.00 |
Multi 10/550 Cutting Knife $374.00 |
OLFA 45mm Textile Blades $150.00 |
Ink Cartridges 10 Pack $94.95 |
1 x DE-202AF Paper Folder | $1,359.00 |
1 x 1/2" Loose Leaf Rings | $24.27 |
1 x TBD - WRIST PIN 111PM-3 | $66.27 |
1 x M6X50 FHSC SCREW | $9.77 |
1 x TBD - TRU-ARC RETAINER RIN | $23.68 |
1 x Cut HP Relay Cable Unit/DC-645 DISCONTINUED | $272.44 |
1 x PERF INTLCK SWT BRKT | $16.47 |
1 x SPUR GEAR 25T 633300074 | $23.68 |
1 x 1/4" Hollow Drill Bit for FP-60 | $39.95 |
1 x TOP FUSE ASSY | $36.91 |